![]() Go in the browser and access the web interface of the camera as a website ( where IP-CAM is the IP address of your cam and you can find it using the mobile app (Camera Settings -> Network Info -> IP Address). This will take up to 2 minutes.īlue light should come ON indicating that your WiFi connection has been successful (if not disable using app). The yellow light will come ON again for the final stage of flashing. The yellow light will come ON and flash for roughly 30 seconds, which means the firmware is being flashed successfully. Remove power to the camera, insert the microSD card, turn the power back ON. Get the correct firmware files for your camera from the releases section ( ).ĭecompress it and save both files (for example home_y203c and sys_y203c) on root path of microSD card. Get a microSD card, 16gb or less, and format it by selecting File System as FAT32. If not, check the other projects related to Yi cams:Ĭheck that you have a correct Xiaomi Yi camera. If both numbers appear in the same row in the table above, your cam is supported. If you want to know if your cam is supported, please check the serial number (first 4 letters) and the firmware version. This firmware completely overwrite the original firmware.ĭo not try to use an fw on an unlisted modelĭo not try to force the fw loading renaming the files Is my cam supported? ![]() Supported camerasĬurrently this project supports only the following cameras: Camera If you enable all the services you may have some problems.įor example, enabling both rtsp streams is not recommended.ĭisable cloud is recommended to save resources. The performance of the cam is not so good (CPU, RAM, etc.).
0 Comments
Leave a Reply. |